model
|
Kv03
|
oil consumption
|
2-3L/h
|
output power
|
14-55kw
|
max.output heat
|
30 000Kcal/h(120,000Btu/h)
|
nozzle
|
brass siphon 1×1.0mm
|
tube diamter
|
90mm
|
tube length
|
130mm
|
heating pipe
|
1.0kw
|
motor power
|
180w
|
power supply
|
220v 50hz or 110v 60hz
|
burner size
|
430x450x290mm
|
working pressure
|
0.5bar(7psi)
Must work with external air compressor
|
fuel
|
all kinds of waste oil,waste engine oil,vegetable oil,diesel oil
|
application
|
0.1t boiler,air heater,grain dryer etc
|
Product Feature
1.safer,pump & stop oil by itself
1.solenoid open self-driven
1.casted flame ring
●mal button lights,quick flicker turns to slowly flicker.
Press reset button to see if burner is back to work.If not,take off the photo cell and wipe.
●Mal button is alway light,reset button can't press.
In this case,power off and connect the power again.
It is a self protection,because new burner,there is no oil in oil pump and filter.Pump can't supply oil within 2 mins,oil float gives message to print board,to shut down the burner for protection.
●Heat button is lighting,then light the mal button.
There is too much water in the oil.
use the valve in the bottom of the small tank to leak water.
Stilling oil for a night,let me water and oil seperate.
●Ignition rod is striking fire,but no fire.
Use the tool to remove the nozzle,check if it has been blocked,change the rubber pad too.
The tool and rubber pads are also with the burner,we send you for this situation.
If you meet other problem,contact us first .
2.Have you improved and innovated your product?
As a factory,we improve and innovate all the time,we take customers requirment seriously.For example:
We insulate copper in demand of NZ customer need.
We change the print board's programme to reach 30s purge.some countries have demand for that.
We change the manual air flap to automatic system.To low down the noise.
We use one air compressor for two or three air solenoid system,to reduce the cost for customer.
If you have any requirement for burner,please let me know.
3.Customers have their own oil system,no need of oil pump system.Is that ok?
Yes,it's ok.Please let me know first.To see if we have to change the print board accordingly.
4.Do customers need to prepare the pre-filer?
No.We have it with the burner.If you have your own ideas,then it's ok.
5.Comparing waste oil burner within air pump,some diesel modified burner and other waste oil
burner brand,what's the difference?
We are true waste oil system,differ from waste oil burner within compressor,diesel modifed burner or other brand.
For example,we design the photo cells specifically for waste oil burner,more sensitive and precision than photodiodes.
6.Is necessary the burner working with external air compressor?
Yes.It is.Because the simple principle is high pressure atomizing.
7.what's the air compressor would match your burner&heater?
KV-03,KV-05,KV-10,KV-20,KV-30 and waste oil heater use the smallest air compressor(120L/min) or above
KV-40,KV-50,KV-60 use 880-900L/min air compressor or above
KV-90,KV-120 use 1250L/min air compressor or above
ps:Air compressor is better bigger than small.Bigger one can supply enough compressed air once,while small capacity compressor may work continually.
8.I am not so familiar about waste oil burner,which model should I choose?
It's ok.Contact us,we will guide you the best burner.
9.Can I pay by credit card instead of going to bank?
Yes,it's ok.Just let us know.
Machine Tool Workshop
Foundry Workshop
Assembled by Handwork
Transport
●By air
●By sea
●By land
After-sale service
●check carefully when you receive the parcel
●check the manual before operation.
●If there is any trouble when using,please take a video for
us.We will tell you how to manage.
Refund Guarantee
●Transcation via alibaba trade assurance order.if we fail to product quality and delivery time,alibaba will pay your loss.
●You can put an trade assurance order directly or ask your sales to draft it for you.
Contact name: Helen Jiang
ID:cn1513245264
Phone/whatsapp/wechat: 86-130 1251 3355
Fax: 0532-68876247
Skype: live:15110a39c97c5b18
email:helenjiang_sales1@ kingweienergy.com(no blank after @)
linkedin: https://cn.linkedin.com/in/waste-oil-burner-supplier-bb4770ba
facebook: https://www.facebook.com/wasteoilburnersupplier
youtube: https://www.youtube.com/channel/UCrIv63Y1ri9tFY_g8DzKO4Q
https://www.youtube.com/channel/UCd2DtCB7ma4BzUwCRPVs4ow
shop on alibaba:Http://jinweijieneng.en.alibaba.com/
Office&factory address:No997 Wangsha Road Chengyang District Qingdao Shandong China
Kingwei Waste Oil Burner Catalogue
|
||||||||
Model
|
Oil Consumption
(L/h)
|
Output Power
(Kw)
|
Max.output Heat
(Kcal/h)
|
Application
|
||||
2-3
|
14-55
|
30 000
|
0.1t boiler,dryer etc
|
|||||
3-5
|
30-60
|
50 000
|
0.1-0.2t boiler,heater etc
|
|||||
6-8
|
80-120
|
100 000
|
0.3t boiler,heater etc
|
|||||
12-15
|
150-200
|
200 000
|
0.4t boiler,grain dryer etc
|
|||||
15-21
|
210-270
|
300 000
|
0.5t boiler,sand dryer etc
|
|||||
30-40
|
230-360
|
400 000
|
0.6t boiler,grain dryer etc
|
|||||
40-50
|
230-460
|
500 000
|
0.8t boiler,rotate furence etc
|
|||||
50-60
|
450-560
|
600 000
|
1.0t boiler,reaction furnace etc
|
|||||
70-80
|
850-1000
|
900 000
|
1.5t boiler,furnace etc
|
|||||
100-120
|
1000-1300
|
12 00 000
|
2.0t boiler,furnace etc
|
|||||
Kv180
|
180-300
|
1500-1800
|
18 00 000
|
3.0t boiler,furnace etc
|
||||
Kv240
|
290-350
|
2000-2500
|
24 00 000
|
4.0t boiler,furnace etc
|
||||
Kv360
|
540-600
|
3000-4000
|
36 00 000
|
6.0t boiler,furnace etc
|
Reviews
There are no reviews yet.