Laser Engraver Cutter Wood Metal MDF Rubber Lightburn App Control Easy Laser Engraver Engraving Desktop Carving Cutting Machine

Laser Engraver Cutter Wood Metal MDF Rubber Lightburn App Control Easy Laser Engraver Engraving Desktop carving Cutting Machine 

NEJE 3 PLUS LASER ENGRAVER & CUTTER WITH N40630 LASER MODULE- 255 X 420 MM – LIGHTBURN – BLUETOOTH – APP CONTROL

Feature:
[420 x 255 mm]Just fit on a desktop with a width of 600mm, and the left side of the machine is not limited by the size of the material. It is suitable for processing large area materials. Under the protection of the MEMS vibration protection sensor, the engraving and cutting processes can be completed at the same time. The X-axis motion module is only 120g and is driven by a 40mm thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure, 3400 x 5600 pixels, engraving accuracy: 0.075 mm dot pitch, 339 dots/inch. The whole machine function test requires only 4 screws to complete the installation.
[Advanced laser module] The newly designed N40630 module can cleanly cut 3mm thick plywood in one pass, with a minimum focus point of 0.05×0.05mm, and can engrave metal by covering the layer. Built-in fast intelligent drive, temperature feedback can be timely, and intelligently adjust fan heat dissipation. Safe and quiet to use.
[More materials, clearer] Wood, MDF, leather, paper, cotton, etc. are all supported. The cutting edges are very clean. Cover spraying can engrave stainless steel, glass, transparent acrylic and so on.
[Portable professional control software]]32-bit control system, the fastest speed can reach 200,000mm/min, supports LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS), you can change it by taking photos with your mobile phone or selecting images from the album To complete the work quickly, NEJE provides free software upgrade services.
[Perfect after-sales service]]The whole machine is guaranteed for free for 2 years (laser module: 2 years and 20,000 hours warranty), and vulnerable parts are shipped worldwide within 24 hours.

Weak light and auto air assist in lightburn
NEJE optimizes GRBL firmware make the diode laser to have weak light in lightburn (GRBL mode) and adds automatic air assist and automatic smoke extraction system functions, eliminating tedious manual control.

Advanced mobile control system with OTA upgrade

Advanced 32-bit+BLE+MEMS new mobile control system, OTA software upgrade more functions and services.

NEJE optimizes the low-light experience in GRBL mode for diode lasers, and the low-light settings can be adjusted through the laserGRBL software.
Support repeated engraving, the position information will not be lost.
BLE-based wireless control, supports NEJE APP wireless control.
Built-in sensor protection, currently in NEJE mode, when the machine angle changes, the device will automatically stop working.

Wireless APP offline control
Wireless control function, turn on the phone, and complete a beautiful project in a few simple steps. The use efficiency is faster, and it does not take up the work computer.
The new NEJE V6.1.2 software supports area expansion, you can simply modify the length of the track to achieve area expansion, NEJE also provides the option of extended track.
The NEJE 3 control system has completed a very large upgrade, supporting OTA firmware and software upgrade services, NEJE has improved in the new GRBL firmware to adjust the low-light display under lighrburn and laserGRBL software and automatically control the air-assisted smoke extraction system. You can safely and stably upgrade to the latest GRBL firmware through NEJE software, When using the device for the first time, please open the NEJE software to update to the latest firmware.

1 x NEJE 3 PLUS Laser Engraving Machine
1 x Laser Module ( N40630 )
4 x Nuts
1 x goggle
1 x L-shaped wrench
1 x USB Cable
1 x Small wrench
1 x 12V4A Power Adapter
1 x with air Assist Kits
1 x Test Paper