factory one package service kingwei brand waste oil automatic industrial burner
| Model | KV05 |
| Oil Consumption | 3-5L/H |
| Output Power | 30-60kw |
| Max.Output Heat | 50,000Kcal/h (200,000Btu/h) |
| Nozzle | siphon brass 1×1.0mm |
| Tube Diameter | 114mm |
| Tube Length | 135mm |
| Heating Pipe | 1.0kw |
| Motor Power | 180w |
| Power Supply | 220v 50hz or 110v 60hz |
| Burner Size(LxWxH) | 510x455x300mm |
| N.W | 25kg |
| working pressure |
0.5bar (7psi) ps:must work with external air compressor smallest capacity is 120l/min |
| Fuel | all kinds of waste oil,waste mixed oil,diesel oil |
| Application |
0.1-0.2T boiler,furnace,air heater,grain dryer, distiller etc |
|
three protection system |
|
|
photo cell protection |
stop the burner when there is no light |
|
mechanical oil floats protection |
stop the burner when oil is not in the appropriate level |
|
oil pump protection |
stop the burner when oil pumps more than 2 mins |
video link:
https://youtu.be/Cki2r2IfEsQ (fully automatically&fire test video)
https://youtu.be/F7qFnn_vza4 (install&maintenance video)
https://youtu.be/eW_YxcRGAnQ (used in chicken house)
our waste oil burner has various applications,can use for both individual and industrial area
small power burners are very popular for individual heating,for home,swimming pool,chicken house etc
big power burners are very suitable for industrial area,such as sand dryer,grain dryer,mold casting,reactor etc
1.malfunction and solution:
Mal button lights,quick flicker turns to slowly flicker.
Press reset button to see if burner is back to work.If not,take off the photo cell and wipe.
Mal button is alway light,reset button can’t press.
In this case,power off and connect the power again.
It is a self protection,because new burner,there is no oil in oil pump and filter.Pump can’t supply oil within 2 mins,oil float gives message to print board,to shut down the burner for protection.
Heat button is lighting,then light the mal button.
There is too much water in the oil.
use the valve in the bottom of the small tank to leak water.
Stilling oil for a night,let me water and oil seperate.
Ignition rod is striking fire,but no fire.
Use the tool to remove the nozzle,check if it has been blocked,change the rubber pad too.
The tool and rubber pads are also with the burner,we send you for this situation.
If you meet other problem,contact us first .
2.Have you improved and innovated your product?
As a factory,we improve and innovate all the time,we take customers requirment seriously.For example:
We insulate copper in demand of NZ customer need.
We change the print board’s programme to reach 30s purge.some countries have demand for that.
We change the manual air flap to automatic system.To low down the noise.
We use one air compressor for two or three air solenoid system,to reduce the cost for customer.
If you have any requirement for burner,please let me know.
3.Customers have their own oil system,no need of oil pump system.Is that ok?
Yes,it’s ok.Please let me know first.To see if we have to change the print board accordingly.
4.Do customers need to prepare the pre-filer?
No.We have it with the burner.If you have your own ideas,then it’s ok.
5.Comparing waste oil burner within air pump,some diesel modified burner and other waste oil burner brand,what’s the difference?
We are true waste oil system,differ from waste oil burner within compressor,diesel modifed burner or other brand.
6.Is necessary the burner working with external compressor?
Yes.It is.Because the simple principle is high pressure atomizing.
7.what’s the air compressor would match your burner&heater?
waste oil heater and small waste oil burner use the smallest air compressor(120L/min) or above
KV-40,KV-50,KV-60 use 880-900L/min air compressor or above
KV-90,KV-120 use 1250L/min air compressor or above
ps:Air compressor is better bigger than small.Bigger one can supply enough compressed air once,while small capacity compressor may work continually.
8.I am not so familiar about waste oil burner,which model should I choose?
Contact us,we will guide you the best burner model.
Yes,it’s ok.Just let us know.
Contact name: Helen Jiang
ID:cn1513245264
Tel/whatsapp/wechat: 86-130 1251 3355
Fax: 0532-68876247
email:helenjiang_sales1@ kingweienergy.com(no blank after @)
linkedin: https://cn.linkedin.com/in/waste-oil-burner-supplier-bb4770ba
facebook: https://www.facebook.com/wasteoilburnersupplier
youtube: https://www.youtube.com/channel/UCrIv63Y1ri9tFY_g8DzKO4Q
https://www.youtube.com/channel/UCd2DtCB7ma4BzUwCRPVs4ow
shop on alibaba:Http://jinweijieneng.en.alibaba.com/
office&factory address:Wangsha Road Chengyang District Qingdao Shandong China
| Kingwei Waste Oil Burner Catalogue | ||||
| Model |
Oil Consumption (Liter per hour) |
Output Power (kw) |
Max.output Heat (Kcal/h) |
Application |
| KV03 | 2-3 | 14-55 | 30,000 | 0.1t boiler,furnace,oven etc |
| KV05 | 3-5 | 30-60 | 50,000 | 0.1-0.2t boiler,furnace,air heater etc |
| KV10 | 6-8 | 80-120 | 100,000 | 0.3t boiler,air heater,grain dryer etc |
| KV20 | 12-15 | 150-200 | 200,000 | 0.4t boiler,air heater,sand dryer etc |
| KV30 | 15-21 | 210-270 | 300,000 | 0.5t boiler,oven,dryer etc |
| KV40 | 30-40 | 230-360 | 400,000 | 0.6t boiler,reactor etc |
| KV50 | 35-45 | 230-460 | 500,000 | 0.8t boiler,dryer,reactor etc |
| KV60 | 40-60 | 450-560 | 600,000 | 1.0t boiler,dryer,reactor etc |
| KV90 | 70-80 | 850-1000 | 900,000 | 1.5t boiler,dryer,reactor etc |
| KV120 | 100-120 | 1000-1300 | 12,00,000 | 2.0t boiler,dryer,furnace etc |
| KV180 | 180-260 | 1500-1800 | 18,00,000 | 3.0t boiler,dryer,furnace etc |
| KV240 | 200-350 | 2000-2400 | 24,00,000 | 4.0t boiler,grain dryer etc |
| KV360 | 400-540 | 3000-4000 | 36,00,000 | 6.0t boiler,grain dryer etc |
Reviews
There are no reviews yet.