DSO1102BV Hantek 100MHz 1GS/s 2CH PC USB Oscilloscope Scopemeter 2G SD Flash Multimeter 2in1 Hi-resolution

Model

DSO1202BV

DSO1102BV

DSO1062BV

Analog Bandwidth

200MHz

100MHz

60MHz

Real-time sampling

1GSa / s

Equivalent sampling

25GSa / s

Record Length

Single-channel maximum record length1MSampling points, dual-channel512K, While dual-channel4K,40K,512KOptional sampling points

Time base range (s / div)

2nS/div-2000S/div (With2-4-8Stepper)

Delay between channels

500ps

Vertical System

ADConverter

8bitResolution, two-channel simultaneous acquisition

Vertical Sensitivity (V / div)

2mV/div~5V/div(InBNCAt the input)

Vertical displacement range

± 50V (5V/div), ± 40V (2V/div~500mV/div), 2V (200mV/div~50mV/div) ± 400mV (20mV/div~2mV/div)

Rise time(InBNCOffice)

≤ 1.7ns

≤ 3.5ns

≤ 5.8ns

DC Gain Accuracy

2mV/div~5mV/div±4% (Sample or Average acquisition)
10mV/div~5V/div±3% (Sample or Average acquisition)

Trigger System

Trigger Sensitivity (Edge trigger type)

DC:CH1 /CH2 (Typical values)From DC to10MHzTo1Grid, from10MHzTo a maximum bandwidth of1.5Grid
AC: attenuation10HzThe following signals
HF Reject:>80kHzWill attenuate the signal
LF Reject: <150kHZWill attenuate the signal
Noise Reduction: Reduce the trigger sensitivity

Trigger Level Range

Internal(Ch1,ch2): From the center of the display ±8div

Trigger Level Accuracy(Typical) for rise and fall times ≥20ns

Internal (ch1,ch2): ±(0.3div×V / div) (From the center of the screen ±4divRange)

Trigger holdoff range

100ns-10s

Trigger Type

Edge

Rising, falling

Pulse Width Trigger

Trigger modes: (greater than, less than, or equal to, not equal to) positive pulse width (greater than, less than, or equal to, not equal to) negative pulse; pulse width range:20nS-10S

Video Trigger

Signal System:Supports standardNTSC,PALAndSECAMBroadcast system;
OK, as the range:1-525 (NTSC)And1-625 (PAL / SECAM)

Slope Touch

Trigger Mode:(Greater than, less than, or equal to, not equal to) positive slope (greater than, less than, or equal to, not equal to) negative slope; Set time:20nS-10S

Overtime Trigger

Start edge: rising, falling; set the time:20ns-10s

Alternate trigger

Internal Trigger: Edge, Pulse, Video, Slope

Frequency Counter

Reading resolution: 6Position
Accuracy (typical):±30ppm(Clock reference errors and ±1Count)
Frequency Range:AC-coupled, from the smallest10HzTo the rated bandwidth

Measure

Cursor measurements

Manual mode: Voltage difference between cursors V; The time difference between cursors T; TThe reciprocal ofHzUnits (1/T)
Tracking mode: the voltage waveform point value and the time value

Automatic measurement

Peak to peak, maximum, minimum, average, RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width