Modeflex, Postforming Grade Laminates In Roll Forms From 0.16mm To 0.5mm Thickness With A Width Up To 1310mm And Customized Length Up To 600m. These Flexible Laminates.
Are Ideally Suited For Postforming Over Very Tight Radii Designs.
Modeflex Has Very Good Postforming Qualities. By Virtue Of Its Composition, Modeflex Gives Resistance To Mild Acids, Detergent, Solvent, Hot & Cold Temperature As Well As Dirt And Light. Modeflex With An Additional Surface Protection Modeshield Is Available To Enhance The Scratch And Wear Resistance Properties For Special Application.
| Typical Applications | ||||||||||
| Front panels for kitchen doors, offices and bathroom furniture. Wall coverings. MODEflex is suitable for all Horizontal General Purpose Post Formable (HGP) applications with MODEshield* and Vertical General Purpose Post-formable (VGP) applications without MODEshield.* |
||||||||||
| Product Specifications | ||||||||||
|
||||||||||
| Typical Applications | ||||||||||
| Technical Specifications as per EN 438 |
Solid Colors HGS & VGS |
Wood Colors without MODEshield* VGS |
Wood Colors with MODEshield* HGS |
|||||||
| Resistance to wear | ||||||||||
|
≥ 350 | 50 | ≥ 350 | |||||||
|
3 | 1 | 3 | |||||||
| Resistance to impact by small dia. ball** | ||||||||||
|
≥ 20 | ≥ 15 | ≥ 20 | |||||||
|
3 | 2 | 3 | |||||||
| Resistance to scratch | ||||||||||
|
≥ 2 | ≥ 2 | ≥ 3 | |||||||
|
2 | 2 | 3 | |||||||
| Resistance to Steam | No visible change – 5 | No visible change – 5 | No visible change – 5 | |||||||
| Resistance to Cracking | No crack – 5 | No crack – 5 | No crack – 5 | |||||||
| Resistance to immersion in boiling water | ||||||||||
| Appearance | No visible change – 5 | No visible change – 5 | No visible change – 5 | |||||||
| Resistance to Staining | ||||||||||
| Group 1 and 2 | No effect – 5 | No effect – 5 | No effect – 5 | |||||||
| Group 3 | Mild effect – 4 | Mild effect – 4 | Mild effect – 4 | |||||||
| Resistance to cigarette burns | Slight change – 4 | Slight change – 4 | Slight change – 4 | |||||||
| Resistance to Fire | Class B | Class B | Class B | |||||||
| *MODEshield: Extra surface technology provides protection against reasonable wear and scratches. ** Rolls length based on the laminate thickness ***Applicable for 0.5mm thickness only.
|
||||||||||
Post Forming is the process of heating and bending laminates under controlled temperature and pressure at the curved edges. The process gives neatly finished and aesthetically appealing products that are free from joints. The radius of forming varies between 3 to 19mm depending on the grade and thickness of the laminate selected.
Modecor Postformable Laminates:
Modecor laminates and their individual application and surface characteristics allow you to combine product mix and match from the attractive color range and textures to create the look you require and express your own style.
Modecor recommends that the decorative surfaces may be cleaned with warm water and mild soaps, such as those used for hands and dishes. We do not recommend the use of cleaners, which may contain abrasives, acids or alkalis; they will damage the decorative surface. Remove stubborn stains with a 1.5-minute exposure to a hypochlorite bleach, followed by a clean water rinse.
It is recommended that any of following reagents should not come in contact with the decorative surfaces.
- Alcohol containing 1% iodine in solution
- Berry products
- Gentian violet
- Hydrogen peroxide solution
- Hypochlorite bleach, except as described above
- Lye solutions
- Mild silver protein, such as 20% argyrols
- Mineral acids, hydrochloric acid such as Lime-A-Way, sulfuric or nitric acid
- Potassium permanganate
- Silver nitrate, in 1% concentration
- Sodium bisulfate, such as Sani-Flush
If a laminate is required to withstand these chemicals, please refer to the technical data for Modecor laminates or contact us.
Storage Tips For Laminates
- Recommended storage conditions are 25°C temperature and 50% relative humidity.
- Store the sheets horizontally and full size, covered with suitable material to prevent from dust.
– MELAMINE FACED PANELS
MDF AND CHIPBOARDS
– EDGE BAND
MELAMINE AND PVC
– DECORATIVE LAMINATES
DECORATIVE LAMINATES
CONTINUOUS PRESS LAMINATES (CPL)
DECORATIVE POSTFROMING LAMINATES
– LAMINATE FLOORING
LAMINATE FLOORING
Reviews
There are no reviews yet.