CNC 3020 300W 4 Axis Router Engraver Milling Machine

Product Description

Technical Parameters

Machine Dimensions:	560X450X450mm
Rack material:	6061 and 6063 Hard aluminum alloy (The unique and dedicated mold extrusion profiles, Let counterfeiters dwarfs.)
Engraving area:	300X200mm
Z-Axis Stroke:	60mm, Engraving depth depends on the length of the tool edge)
Acceptable material thickness:	≤60mm
Rail type:	Chromeplate shaft+Linear Bearings,)(Surface hardening 61HRC)
Type of screw:	1404 Double thread Trapezoidal Screw
Spindle motor:	300W/12000r/min((Very small noise))
Collet type:	ER11,1/8″(3.175mm) Collet
Stepper motor and drive:	two-phase hybrid stepping motor , 3A/PHASE,150N.cm, 8 segments drive.
Maximum operating speed:	4000mm/min (Engraving speed : 300-3000mm/min)
Repeat positioning Accuracy:	≤0.03mm
Communication interface:	Parallel port (Must use the desktop computer, Does not support laptop)
Software Compatability:	Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM,coppercam)
Command code:	G code/.nc/.ncc/.tab/.txt
Machine weight:	25kg


Rotation Axis (4th Axis) Description:	Chuck Size: 50mm self-centering chuck Center height: H = 51mm Clamping diameter: 50mm or less Deceleration mode: synchronous wheel / belt Deceleration ratio: 4:1 Stepper motor:NEW 57 type / 3A Stepper Drive: T65-axis drive Positioning accuracy: 0.075 ° Weight: 4kg

Packing list:
1× Engraving machine 1× Control box 1× Parallel port cable 25pin 1× Power cable 1× Tool box and tools 3× Axis motors 1× Rotation Axis 1× CD of manual and software MACH3 (if not get, may be lost in customs, please contact us)

Packing list:

1× Engraving machine

1× Control box

1× Parallel port cable 25pin

1× Power cable

1× Tool box and tools

3× Axis motors

1× Rotation Axis

1× CD of manual and software MACH3 (if not get, may be lost in customs, please contact us)