ANENG ST209 6000countsFull Intelligent Automatic Range Digital Current Multimeter(AUTO)
Feature
1-1. Display: liquid crystal display (LCD);
1-2. Maximum display: 5999 (3 5/6) bit automatic polarity display;
1-3. Measurement method: double integral A/D conversion;
1-4. Sampling rate: about 3 times per second;
1-5. Overrange display: The highest position shows”OL”;
1-6. Low voltage display:”Low voltage symbol “symbol appears;
1-7. Working environment:(0~40)°,relative humidity<80%;
1-8.Power: AAA 1.5V battery(not incluida);
Function
| DC voltage DCV | YES | AC voltage ACV | YES |
| DC current DCA | YES | AC current ACA | YES |
| Resistor / Diode / On-Off Test / Capacitor |
YES | Frequency F | YES |
| Square wave output | YES | NCV | YES |
| Zero line /Fire line test | – | Full unit symbol | YES |
| Backlight manual/Auto off | YES | True RMS measurement | YES |
| Temperature(°/°) | YES | Flashlight lighting | YES |
| Range | Accuracy | Resolution | |
| DC voltage | 6V/60V/600V | ± (0.8% + 10) | 0.001V/ 0.01V/0.1V |
| DC voltage | 1000V | ±(0.5%+3) | 1V |
| AC voltage | 6V/60V/600V | ± (0.8% +3) | 0.001V/ 0.01V/0.1V |
| AC voltage | 750V | ± (1.2% +10) | 1V |
| DC current | 60A/600A | ± (2.5% +30) | 0.01A/0.1A |
| AC current | 60A/600A | ± (2.5% +30) | 0.01A/0.1A |
| Resistance (omh) | 600 | ± (0.8% + 5) | 0.1 |
| Resistance (omh) | 6K/60K/600K/6M | ± (0.8% + 3) | 1/10/100/1k |
| Resistance (omh) | 40M | ± (2.5% + 3) | 10k |
| Capacitance(C) | 60nF/600nF/6uF/60uF/600uF | ± (3.5% + 20) | 10pF/100pF/1nF/10nF/100nF |
| Capacitance(C) | 6mF/30mF | ± (5% + 3) | 1uF/10uF |
| Frequency | 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz | ± (0.1% + 3) | 0.01Hz/0.1Hz/1Hz/10Hz/100Hz/1kHz/10kHz |
| Temperature | (-20-1000℃) | As the instructions | 1℃ |
| (0-1832℉) | As the instructions | 1℉ |
Package:
1* instruction manual,
1* certificate, one leather cas
1* pair of test leads,
1* temperature probe,
1* certificate, one leather cas
1* pair of test leads,
1* temperature probe,
NOTE:
This series of instruments is designed in accordance with IEC1010 (Safety Standards promulgated by the International Electrotechnical Commission), please read the safety precautions before use.
1. When measuring voltage, please do not input the limit voltage exceeding the effective value of DC 1000V or AC 750V;
2.The voltage below 2.36V is a safe voltage. When measuring higher than 36V DC and 25V AC voltage, check whether the test leads are in reliable contact, are connected correctly, and are well insulated to avoid electric shock;
3. When changing functions and ranges, the test leads should leave the test point..
Reviews
There are no reviews yet.