Product Description
Description:
Situation1: If the stripped and damaged screws still has hat(head), you can use single side screw extractor to remove it out, but other tools are needed, such as a drill bit, to drill a hole in the screw head.
Easily removes screw and bolt head types from flat head, phillips, hex, allen, torx, square, round and any other type of stripped screw or bolt you encounter.
How To Choose A Correct Screw Extractor?
Situation1: If the stripped and damaged screws still has hat(head), you can use single side screw extractor to remove it out, but other tools are needed, such as a drill bit, to drill a hole in the screw head.
Situation2: If you would like to remove the stripped and damaged screws without hat(head), you can use double sides screw extractor to remove it out, firstly useone side(without thread) to drill a hole on the screw diameter, but needs to choose suitable size(0#,1#,2#,3#,4#), and then use another side(with thread) to drill the damaged screw out.
Both these two situations above need to use reverse.
Specification
|
Item
|
Broken Screw Extractor Kit
|
|
Material
|
High Speed Steel
|
|
Quantity
|
5PCS
|
|
Brand
|
NINDEJIN
|
Notice
1. Firstly, using drill head to penetrate drill, be careful not to use the impact hammer gear, with the normal screwdriver gear.
2. Secondly drilling time to the slowest speed, there is a fixed speed with fixed speed, no in the end speed file a certain to be able to evenly rotate.
3. After the volley speed is stable and then aligned with the top of the screw center for a long time. Don’t worry, be patient.
4. Then when you obviously felt drilled into and drilled for a while, and then for another.
5. The head rotates, puts the rotating head into the hole just drilled, presses and turns on the electric screws .It can be
removed normally.
6. The whole process reverse operation!
Please confirm the material and the sizes very carefully with the supplier before you place order. Due to different material and the manual measurement, the measurements might have a slight error.
Tips for Using
1. Firstly, using drill head to penetrate drill, be careful not to use the impact hammer gear, with the normal screwdriver gear.
2. Secondly drilling time to the slowest speed, there is a fixed speed with fixed speed, no in the end speed file a certain to be able to evenly rotate.
3. After the volley speed is stable and then aligned with the top of the screw center for a long time. Don’t worry, be patient.
4. Then when you obviously felt drilled into and drilled for a while, and then for another.
5. The head rotates, puts the rotating head into the hole just drilled, presses and turns on the electric screws .It can be
removed normally.
6. The whole process reverse operation!
Reviews
There are no reviews yet.