130C Degree Fast Thermal Conductivity Tester Transient Plane Source TPS Thermal Conductivity Meter r
Introduction:
DR-S is a thermal conductivity tester developed using Transient Plane Heat Source Technology (TPS) for testing the thermal conductivity of a wide variety of materials. Transient planar heat source method is the latest in the study of thermal conductivity, which brings measurement technology to a whole new level. It can quickly and accurately measure the thermal conductivity when researching materials, which provides great convenience for enterprise quality monitoring, material production and laboratory research. The instrument is easy to operate, the method is simple and easy to understand, and will not cause damage to the sample to be tested.
More advantages:
1.Instrument Reference Standard: ISO 22007-2 2008
2.The test range is wide and the test performance is stable. It is in the leading position in the same kind of instruments in China.
3.Direct measurement, the test time can be set about 5-160s, which can quickly and accurately measure the thermal conductivity and save a lot of time.
4.It will not be affected by contact thermal resistance as static method.
5.There is no need for special sample preparation and no special requirement for sample shape. Bulk solids need only relatively smooth sample surface and satisfy at least twice the probe diameter in length and width.
6.Non-destructive testing of samples means that the samples can be reused.
7.The probe is designed with the structure of double helix, and combined with the exclusive mathematical model, the core algorithm is used to analyze and calculate the data collected on the probe.
8.The structure design of the sample table is ingenious and easy to operate. It is suitable for placing samples of different thickness and is concise and beautiful.
9. The data acquisition on the probe uses the imported data acquisition chip. The high resolution of the chip makes the test result more accurate and reliable.
10. The host’s control system uses an ARM microprocessor, which is faster than traditional microprocessors, improves the analysis and processing capabilities of the system, and the calculation results are more accurate;
11. The instrument can be used for the determination of thermal properties of bulk solids, paste solids, granular solids, colloids, liquids, powders, coatings, films, thermal insulation materials, etc.
12. Intelligent human-machine interface, color LCD display, touch screen control, easy to operate;
13. Powerful data processing capabilities. Highly automated computer data communication and report processing system.
Working principle:
Transient planar heat source technology (TPS) is a new method for measuring thermal conductivity, developed by Professor Silas Gustafsson of the University of Technology, Chalmer, Sweden, based on the hotline method. Its principle of determining the thermal properties of a material is based on the transient temperature response produced by a step-heated disk-shaped heat source in an infinite medium. A flat probe is made of a thermally resistive material, and serves as both a heat source and a temperature sensor. The thermal resistance coefficient of the alloy has a linear relationship with the relationship between temperature and resistance. That is, the heat loss can be known by understanding the change of the resistance, thereby reflecting the thermal conductivity of the sample.The continuous double-spiral structure sheet formed by etching after gold etching has a double-layer insulating protective layer and a thin thickness, which makes the probe have a certain mechanical strength and maintain electrical insulation from the sample. During the test, the probe was placed in the middle of the sample for testing. When the current passes through the probe, a certain temperature rise occurs, and the generated heat is simultaneously diffused to the samples on both sides of the probe. The speed of thermal diffusion depends on the heat transfer characteristics of the material. By recording the temperature and the response time of the probe,The thermal conductivity can be directly obtained from the mathematical model.
Testing object:
Metal, ceramic, alloy, ore, polymer, composite, paper, fabric, foam (surface-level insulation, sheet), mineral wool, cement wall, glass reinforced composite board CRC, cement polystyrene board, sandwich Concrete, FRP panel composite panels, paper honeycomb panels, colloids, liquids, powders, granules and paste solids, etc., have a wide range of test objects.
Technical Parameters:
1. Aluminium box and carton box, careful and tight package, make sure the package is intact
2. The package will be shipped by DHL/Fedex/TNT/EMS/UPS/China post/EF-Express/Special line, as you have chose in the order.
If you encounter with any problems during the testing process,we promise providing urgent guidence and after-sales sevice within 48 hours and solution providing within 3 working days. If customers require on-site service, the transport and travel expense shall be responsible for the cost.
1. Pre-service
24 Hours online service for customers’ consultation.
2. Middle service
–Fullfill customer’s request:
–Payment method depends on customer.
–Promptly production and delivery
–Can provide invoice value if you want to decrease your tax.
3. After sale service
–One year warranty service and all life maintenance.
–Technical Egineer are avalible for oversea trainning.
–Remote control technical consult
Shanghai Glomro Industrial Co., Ltd was founded in 2012. Specializing in the production of testing equipment and industrial measurements and instruments products. Products of high quality, fashionable, widely used in a variety of industrial areas, not only has the broad masses of the domestic sales market, but also exported to Europe and the United States.
Glomro hinge over the years has always adhered to “quality of products in order to survive, credibility and development services” business purposes. Committed to providing you with high-quality products and quality services. Have a professional, dedicated design management team, from product design, mold making, molding to the Product assembly, for each aspect and processes are rigorously testing and control.
Over the past few years of production and management and exploration, Longtai set up its own quality management system. Industry standards including SAE,IEC JEDEC,ASTM and MIL-STD,ISO:9001,UL,CE certified. Glomro always implement the concept of customer value creation for customers tailored products to meet the needs of different customers, and continuously provide customers with solutions to technical problems,further exploration innovation,and excellence.
Warmly welcome you and opening up the boundaries of communication. We synchronize with your ideal partner!
Q:Are your company a trading one or a factory?
A:Factory + trade (integration),More than 10 years focusing on test instruments field,6 years exporting experience.
Q:After an order is placed, when to deliver?
A:Generally about 10-25days, If we have inventory, we can arrange shipment within 3 days. Please be aware that our production lead times depend on specific items and item quantities.
Q:What about the warranty with after – sales services?
A:The testing machine is guaranteed for 12 months by Shanghai Glomro Building Industrial Co.Ltd ,One year promise including free maintenance and changing Instrument components.Besides, Full-life cycle technical support is provided.
Q:What about the product’ services and quality?
A:Each instruments must be carried out 100% quality examination and test when shipping and delivery goods. each of our product provide video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer’s company when you need.
Reviews
There are no reviews yet.