CNC 3018 PRO 15000MW Laser Wood Router Engraving Machine with GRBL Control

Feature:

*The laser can be carved including: Can Engrave:MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam
Paper/Anodized Aluminum/Ceramics/Stone/Stainless steel
*Can Not Engrave:Metal/Glass/PCB/Reflective Material/Transparent Material
*We have a 15W Laser, which can engrave metal materials such as stainless steel and alumina.
*The blade can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material
*ER11 needs shrink fitting. Both the spindle and ER11 have the correct diameter, but ER11 is designed to be minus tolerence to spindle so you cannot put it on directly.
*Offline controller supports offline work, you will not need to connect to a computer
*We have EU and US adapters and I will send the correct plugs according to your country.
*If you need any question,feel free to contact me.

Product details:

Packaging Details
1.Inside :Plastic bags with foam For Machine.
2.Middle :Individual Carton packaging

 WE FOCUS ON CUSTOMER SATISFACTION!
Zhengzhou Lunyee Industries Development Co., Ltd. is a leading manufacturer for factory automation(FA) products!We are dedicated in power transmission and motion control solutions!

We have a professional technical team, from research and development, design, production, assembly to after-sales one-stop service.
We manufacture power transmission products like AC and DC(brush/brushless) gear motor,high precision planetary gearbox(spur/helical gear)for servo motor and stepping motor,linear motion products like linear bushing,linear guide, ball screw,locking nut and coupling and so on!

And for the CNC machine, we manufacture DIY laser engraving machine and industrial humidifier.

Q: Does this machine need to be assembled when I received it?
A: This machine comes as a kit. You need to assemble it yourself. All tools and part are included in the kit.

Q: Are there software and instructions can I get it?
A:You can get the software ,contact us.

Q: Whick type computer system can run its software?
A:The software only support the Windows system.

Q: What’s the laser’s lifetime?
A: The laser module have over 6,000 hours lifetime.

Q: What material can it engrave?
A:Wood, bamboo, plastic, paper, leather, rubber.

Q:What material can it cut?
A:cork wood, paper, thin leather.

Q:Can I use it to cut or engrave on metal?
A:It can not engrave or cut on any metal.

Q: Can I regulate the laser power or the laser power is adjustable?
A: Sorry that the Fixed laser power is not adjustable, but the engraving speed is adjustable.

Q: How long can the machine work continuously?
A: It can work continuously about 45 minutes, after the laser mould cool down(about half of an hour), then start work again. Long time work continuously with shorten the laser module liftetime.

Q: When I receive it, how to let it work?
A: Fist of all, you need to plug the stepper motor power cable to the controller board, then installl the software and the driver, power supply the machine,that’s all.