Model |
DSO1202BV |
DSO1102BV |
DSO1062BV |
Analog Bandwidth |
200MHz |
100MHz |
60MHz |
Real-time sampling |
1GSa / s |
||
Equivalent sampling |
25GSa / s |
||
Record Length |
Single-channel maximum record length1MSampling points, dual-channel512K, While dual-channel4K,40K,512KOptional sampling points |
||
Time base range (s / div) |
2nS/div-2000S/div (With2-4-8Stepper) |
||
Delay between channels |
500ps |
||
Vertical System |
|||
ADConverter |
8bitResolution, two-channel simultaneous acquisition |
||
Vertical Sensitivity (V / div) |
2mV/div~5V/div(InBNCAt the input) |
||
Vertical displacement range |
± 50V (5V/div), ± 40V (2V/div~500mV/div), 2V (200mV/div~50mV/div) ± 400mV (20mV/div~2mV/div) |
||
Rise time(InBNCOffice) |
≤ 1.7ns |
≤ 3.5ns |
≤ 5.8ns |
DC Gain Accuracy |
2mV/div~5mV/div±4% (Sample or Average acquisition) |
||
Trigger System |
|||
Trigger Sensitivity (Edge trigger type) |
DC:CH1 /CH2 (Typical values)From DC to10MHzTo1Grid, from10MHzTo a maximum bandwidth of1.5Grid |
||
Trigger Level Range |
Internal(Ch1,ch2): From the center of the display ±8div |
||
Trigger Level Accuracy(Typical) for rise and fall times ≥20ns |
Internal (ch1,ch2): ±(0.3div×V / div) (From the center of the screen ±4divRange) |
||
Trigger holdoff range |
100ns-10s |
||
Trigger Type |
|||
Edge |
Rising, falling |
||
Pulse Width Trigger |
Trigger modes: (greater than, less than, or equal to, not equal to) positive pulse width (greater than, less than, or equal to, not equal to) negative pulse; pulse width range:20nS-10S |
||
Video Trigger |
Signal System:Supports standardNTSC,PALAndSECAMBroadcast system; |
||
Slope Touch |
Trigger Mode:(Greater than, less than, or equal to, not equal to) positive slope (greater than, less than, or equal to, not equal to) negative slope; Set time:20nS-10S |
||
Overtime Trigger |
Start edge: rising, falling; set the time:20ns-10s |
||
Alternate trigger |
Internal Trigger: Edge, Pulse, Video, Slope |
||
Frequency Counter |
Reading resolution: 6Position |
||
Measure |
|||
Cursor measurements |
Manual mode: Voltage difference between cursors V; The time difference between cursors T; TThe reciprocal ofHzUnits (1/T) |
||
Automatic measurement |
Peak to peak, maximum, minimum, average, RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width |
HYJ
2019-01-17
Reviews
There are no reviews yet.