HH-601A high-precision super constant temperature water bath pot introduction:
HH-601A high-precision super constant temperature water bath The outer casing is made of metal plate, and the control box is directly installed on the water tank. There are two condensate pipes in and out of the water nozzle. The imported high-quality water pump is used as the circulating power in the water tank to solve the problem of uneven temperature and temperature, so that the temperature control accuracy and water uniformity of the instrument can reach higher requirements.
technology. All technical indexes have reached the national standard and it is a new generation of super constant temperature water bath. It has the advantages of high temperature control precision, strong corrosion resistance, compact structure, beautiful appearance, energy saving and long service life. It is used in experimental science fields such as biology, physics, plant, chemical, medical, environmental protection or auxiliary heating.
|
Model(LED)
|
Temperature Contrd Range(℃)
|
Power(W)
|
Working Size (cm)
|
Outside Size (cm)
|
|
HH-501
|
RT~100(0.5℃)
|
800
|
350×280×180mm
|
52×36×39
|
|
HH-501A
|
RT~100(0.05℃)
|
800
|
350×280×180mm
|
52×36×39
|
When adding water, please pay attention to the upper cover not less than 8cm (super constant water bath plus water) must use soft water, preferably with distilled water, do not use hard water such as well water, river water, spring water, etc., to prevent the heating tube from bursting and affecting the sensitivity of the constant temperature. (Note that the instrument socket is plugged in first, then the power socket is plugged in)
First turn on the power, turn on the circulating water pump, then turn the setting measurement switch of the constant temperature part to the required temperature (digital display), the power supply enters the ON indication, then the instrument is already heating, when the temperature control indication is turned OFF, the water temperature of the water tank The set temperature has been reached. When the water temperature drops, the indicator enters the heating ON state "automatic temperature control".
If you need to quickly reduce the working room temperature, please turn off or adjust the digital display temperature index. Use any external latex tube to connect to the cold water or tap water condensate nozzle, and use the latex tube to connect to the pool for circulating cooling. The water in the water tank. It will condense quickly.
1. Please read the instructions carefully before use. Close the nozzle. Remember to add water to the water line first, then turn on the power.
2. Set the digital display temperature, turn on the power switch to warm the water tank, cover the water tank cover, wait for the water temperature to rise to the required temperature value, turn on the circulating power switch, and the water in the water tank is circulating indoor temperature.
3. The water level should not be too high to prevent the water from overflowing and causing experimental errors.
4, can not be too high, to prevent water spills caused by experimental errors.
5. When you need to cool down quickly, there are two water nozzles next to the control box. Any one enters the condensate (ice water or tap water), and the other enters the water outlet (with a latex tube) to help lower the temperature.
6, in order to extend the life of the instrument, please be careful not to damp the control box to prevent leakage.
7. The instrument is guaranteed for one year from the date of shipment (the cost of the work is caused by improper or improper use) and lifetime maintenance.
8. At the end of use, please put the water (outlet) clean, wipe it with a dry cloth, and put it in a dry and ventilated place.
A: We are a factory.
A: We don't have MOQ limit, you can order any quantity you want.
If you need scales with your specification, logo, packing, etc, please negotiate with us.
A: We can produce scales with your logo, brand, packing. MOQ is 100pcs/model.
If your trail order is less than 100pcs, please pay us 100USD for OEM, we will refund you once your order is over 100pcs.
A: 2-3 days for sample, 15-20 days for 1000pcs, 30-35days for 40HQ.
A: L/C at sight, T/T, Western Union and Paypal are all available.
30% deposit T/T in advance, rest against the Shipping Doc.
100% in advance for sample order.
A: a. International Experess: DHL/TNT/FEDEX/UPS (For sample)
b. By air (For sample orders.)
c. By sea (15-45days), port of loading: Shanghai
d. By domestic logistics to your forwarder. (2-3days)
A: Our factory is located in Changzhou City, Jiangsu Province, China, near Shanghai.You can fly to Shanghai Hongqiao airport.
Welcome to visit us!
Reviews
There are no reviews yet.