Vertical Acid Process Mixed Flow Slurry Singlestage Centrifufal Pump For Effluent Treatment

1. the injection molding of frpp / PVDF plastic material can be used for most chemical liquids and acid – base; 

2. suitable for various acid and alkali liquid circulation, cooling, spray washing equipment, waste gas tower, etching machine, electroless plating, no electrolytic nickel and other special occasions

3. the pump uses dry shaft seal, can be used for idle operation, idling will not damage the motor, the pump body has the design of oil seal, ensure that acid gas will not easily enter the motor shaft, so as to protect the motor and prolong the service life of the motor

4. the motor shaft is made of sus and titanium shaft, directly from the inside of the motor through the special process to ensure the concentricity and durability of the normal work. 

5. unique channel design, high pressure, high efficiency, low noise, no leakage, easy maintenance;  6. it is suitable for the installation and use in the groove / groove, and can also be used with the filter;

PT – 40 – VK – 1 – 5 – N – F

 1        2    3      4     5    6    7

1.Model:PT

2.In-Outlet Size: 20-3/4”  25-1”  32-1-1/4”  40-1-1/2”

3.Specific Weight :VK-1.1  VP-1.4

4. Power : 1/15, 1/8, 1/6, 1/4, 1/3, 1/2, 1, 2, 3HP

5. Frequency :5-50Hz  6-60Hz

6. Rubber Material :N-NBR  E-EPDM  V-VITON

7. Pump Material :F-PP+GF  C-CPVC  K-PVDF