high pressure 980 rpm 40kw electric pump sludge transfer pumps
Pump Specifications
Pump specification | Motor specification | ||
Capacity | 360-830m3/hr | Power | /KW |
Head |
10-61m |
Speed | /rpm |
Speed | 500-1140rpm | Volts | /V |
Inlet/Outlet | 200mm/150mm | Frequency | /HZ |
Efficiency | 72% | Protection grade | / |
NPSHr | 2-9m | Insulation class | / |
Rubber Pumps Material |
Metal Pumps Material |
||||
No |
Part |
Material |
No |
Part |
Material |
1 |
Base |
Cast Iron |
1 |
Base |
Cast Iron |
2 |
Shaft |
4140 High Tensile Steel* |
2 |
Shaft |
4140 High Tensile Steel* |
3 |
Bearing Assembly |
Timken (Cast Iron Body) |
3 |
Bearing Assembly |
Timken (Cast Iron Body) |
4 |
Shaft Sleeve |
420 Stainless Steel |
4 |
Shaft Sleeve |
420 Stainless Steel |
5 |
Pump Casing |
Cast Iron |
5 |
Pump Casing |
Cast Iron |
6 |
Frame Plate Liner Insert |
Rubber |
6 |
Frame Plate Liner |
27% Chrome White Iron |
7 |
Cover Plate Liner |
Rubber |
7 |
Volute Liner |
27% Chrome White Iron |
8 |
Impeller |
Rubber Coated High Tensile Steel |
8 |
Impeller |
27% Chrome White Iron |
9 |
Throat Bush |
Rubber |
9 |
Throat Bush |
27% Chrome White Iron |
10 |
Cover Plate |
Cast Iron |
10 |
Joint Rings |
Rubber |
11 |
Stuffing Box |
Cast Iron |
11 |
Cover Plate |
Cast Iron |
12 |
Expeller |
27% Chrome White Iron |
12 |
Stuffing Box |
Cast Iron |
13 |
Expeller Ring |
Natural Rubber |
13 |
Expeller |
27% Chrome White Iron |
14 |
Bolts |
Zinc Plated Steel |
14 |
Expeller Ring |
Natural Rubber |
15 |
O-rings |
Nitrile Rubber |
15 |
Bolts |
Zinc Plated Steel |
16 |
Seals |
Rubber |
16 |
O-rings |
Nitrile Rubber |
17 |
Seals |
Rubber |
17 |
Seals |
Rubber |
* Other shaft material options are available.
Selection Charts
MAH 1.5-1 for example:
MAH — Centrifugal slurry pump
1.5 — Suction diameter (inch)
1 — Discharge diameter (inch)
Type | Max. power | Capacity | Head | Speed | Max.Eff | NPSH | Impeller Dia. | Max.particle size |
(kw) | (m³/h) | (m) | (r/min) | (%) | (m) | (mm) | (mm) | |
MAH1.5-1 | 15 | 12-28 | 6-65 | 1200-3800 | 40 | 2-4 | 150 | 14 |
MAH2-1.5 | 15 | 32-72 | 6-58 | 1200-3200 | 45 | 3.5-8 | 185 | 19 |
MAH3-2 | 30 | 39-86 | 12-64 | 1300-2700 | 55 | 4-6 | 215 | 25 |
MAH4-3 | 60 | 86-198 | 9-52 | 1000-2200 | 71 | 4-5 | 245 | 28 |
MAH6-4 | 120 | 162-360 | 12-56 | 800-1500 | 68 | 5-8 | 365 | 44 |
MAH8-6 | 120 | 360-830 | 10-61 | 500-1140 | 72 | 2-9 | 510 | 63 |
MAH10-8 | 260 | 612-1368 | 11-61 | 400-850 | 71 | 4-10 | 685 | 76 |
MAH12-10 | 560 | 936-1980 | 7-68 | 400-750 | 82 | 1-5 | 760 | 86 |
MAH14-12 | 560 | 1260-2772 | 13-63 | 300-600 | 77 | 3-10 | 965 | 90 |
The MAH series Mineral Processing Heavy Duty Centrifugal Slurry Pump is designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements. The MAH series slurry pump will maintain high efficiencies over the wear life of its components.
About Us
Innovation and Excellence, are the three words which most immediately characteristics.
We “Modo Pump” have been offering high end Industrial Centrifugal Pump.Today,we are counted among the key manufacturers, Suppliers and Exporters of kinds of Centrifugal slurry pumps. We have been using high quality raw material in the production sourced from the chief vendors. To cater to the varied necessities of the valuable clients, we have been providing this array of pumps in wide-ranging sizes and specifications. All our products are widely reckoned in the market for durability, performance and working efficiency.
1. What is your product range?
Slurry pumps(Horizontal, vertical, submersible type.)
Water pumps(Multistage, end suction, double suction)
2. What information I need to offer for quotation?
Liquid:___ Pump Capacity___m3/h
PH:_____ Pump Head: ___m
Specific of gravity___ Voltage ___V Frequency ___Hz
3. Do you only supply pumps? Could you supply driven equipment?
Yes, sure ,the pumps could be coupled with motor and diesel engine, below brands for your reference:
Motor: WEG, SIMENS ,ABB, TECO ,and Chinese brands
Diesel engine: Cummins, Deutz, Perkins,Volvo,MITSUBISHI, Caterpiller,MTU,and Chinese brands.
4. What is your MOQ?
We value every client, no matter pump or spare parts, one set or one piece, we treat the same with 100sets.
5. Is OEM parts available?
Yes, please send me the detailed drawing. Different materials is available.
Reviews
There are no reviews yet.