Product Category
Product Description
Liquid Manual Meter Microprocessor Proportional Peristaltic Chemical Dosing Pump 24v
The JCM Series solenoid dosing pumps offer an extensive range of features, including microprocessor control for accurate and flexible automation in response to instrument signals. The microprocessor design employs a customized liquid crustal display (LCD) and a taxtile response keypad. The "state-of-the-art" surface mount electronics are fully encapsulated to ensure protection in its working environment. all external inputs and outputs are opto-isolated from microprocessor.
|
Model
|
Pressure(Bar)
|
Flow Rate(L/H)
|
Connections
In/Out(mm)
|
Max Frequency
|
GW(kg)
|
Packing Size
L*W*H(mm)
|
|
200
|
3
|
10
|
4/6
|
160
|
2.5
|
295*195*195
|
|
5
|
8
|
|||||
|
9
|
2
|
|||||
|
201
|
1
|
7
|
4/6
|
160
|
JCMA-S: Manual Adjustment
1) Manual adjust flow through the key in the control panel
2)Pump LED ON/OFF indicator
3)Displayable frequency percentage
1) Manual adjust flow through the key in the control panel
2)Pump LED ON/OFF indicator
3)Displayable frequency percentage
JCMA-C: Auto-Adjust (digital impulse signal control)
1)The pump carries working condition display, liquid-level probe and remote ON/OFF connector, two output modes available
2)Manual flow adjust mode: pump will output according to your manual-chose frequency
3)Auto flow adjust mode: pump will output by the signal recived (Digital pulse signal)
1)The pump carries working condition display, liquid-level probe and remote ON/OFF connector, two output modes available
2)Manual flow adjust mode: pump will output according to your manual-chose frequency
3)Auto flow adjust mode: pump will output by the signal recived (Digital pulse signal)
JCMA-H: Auto-Adjust (4-20mA electric curent signal control)
1)The pump carries working condition display, liquid-level probe and remote ON/OFF connector, two output modes available
2)Manual flow adjust mode: pump will output according to your manual-chose frequency
3)Auto flow adjust mode: pump will output by the signal recived (4-20mA electric current signal)
1)The pump carries working condition display, liquid-level probe and remote ON/OFF connector, two output modes available
2)Manual flow adjust mode: pump will output according to your manual-chose frequency
3)Auto flow adjust mode: pump will output by the signal recived (4-20mA electric current signal)
JCMA-F: Auto-Adjust (digital impulse signal control)
1)The pump carries working condition display, liquid-level probe and remote ON/OFF connector, two output modes available
2)Manual flow adjust mode: pump will output according to your manual-chose frequency
3)Auto flow adjust mode: pump will output by the signal recived (Digital pulse signal), and send back operating signal for remote control.
1)The pump carries working condition display, liquid-level probe and remote ON/OFF connector, two output modes available
2)Manual flow adjust mode: pump will output according to your manual-chose frequency
3)Auto flow adjust mode: pump will output by the signal recived (Digital pulse signal), and send back operating signal for remote control.
Key Features
Key Features
1) High speed operation: up to 400 strokes per minute results in high resolution chemical feed, with the elimination of slug-feed effects
2) Compact size: JCMA pumps are small, quiet, and lightweight
3) Long lasting diaphragm: The diaphragm is made up by PYFE, which is compatible with all kinds of chemicals. The life of the diaphragm is over 5 years, which 5 times as national standards GB/T7782-2008
4) Strong stability: Smooth working stability in AC100-240V, and suitable for 50-60 Hz range
5) High protection level: JCMA series metering pump protection level is IP65, and it can function safely under tough environment
6) Ball check valves: The protection ball, seat and guide assembly ensure tight sealing to prevent loss of prime
1) High speed operation: up to 400 strokes per minute results in high resolution chemical feed, with the elimination of slug-feed effects
2) Compact size: JCMA pumps are small, quiet, and lightweight
3) Long lasting diaphragm: The diaphragm is made up by PYFE, which is compatible with all kinds of chemicals. The life of the diaphragm is over 5 years, which 5 times as national standards GB/T7782-2008
4) Strong stability: Smooth working stability in AC100-240V, and suitable for 50-60 Hz range
5) High protection level: JCMA series metering pump protection level is IP65, and it can function safely under tough environment
6) Ball check valves: The protection ball, seat and guide assembly ensure tight sealing to prevent loss of prime
Product Packing&Delivery
PACKAGE:
Standard export carton packing.
DELIVERY TIME:
7-20 days after confirming order,detail delivery date should be decided according to
production season and order quantity.
Standard export carton packing.
DELIVERY TIME:
7-20 days after confirming order,detail delivery date should be decided according to
production season and order quantity.
Company Information
Wuxi EWATER Water Treatment Co.Ltd. is a one-stop purchasing, exporting, delivering service provider in Water industry field, located in International Environmental Protection Zone,Yixing,China.
Facilitated with the largest manufacturer of FRP Tank—Canature Huayu Environmental Products Co,.Ltd (the founder’s co-owned
factory), and plentiful manufacturers of water treatment products in China, we provide the most cost- effective products andconsiderately customized service for our customers like Engineering Company /Water treatment product distributor and Users in water treatment industry all over the world.
We are proud of our Partner/Customer’s success, as the success of our Partner/Customer "Jieming International Trading Dubai" in the Middle East. We want much more "Jieming" successes all over the world with our support, THAT ONLY IS OUR SUCCESS!
Certifications
Reviews
There are no reviews yet.