MODEedge, Modecor offering melamine and PVC edgebands matching to all Modecor panel and laminate decors. Melamine edgebands are available without or with pre-applied hot melt glue based on the customer requirements. PVC edgebands are available without glue.
Melamine edgebands are available in rolls of 50m and 100m with width of 20-60mm and thickness of 0.3mm. PVC edgebands are available in rolls of 50m and 100m and width of 22mm and thicknesses of 0.5mm and 2.00mm.
MODEedge is flexible materials suitable for finishing the exposed edges and completes furniture edge perfectly.
|
Available in
|
Length (Im)
|
Width (mm)
|
Thickness (mm)
|
| Melamine Rolls |
50 and 100
|
20 – 60
|
0.3
|
| Extures |
Matt, Pearl, Nature Touch & Ash Wood textures
|
||
| PVC Rolls |
50 and 100
|
22
|
0.5 and 2.00
|
| Textures |
Matt & Pearl Textures
|
||
| Typical Application | |||
| MODEedge can be easily fixed to any substrate (MDF/Chipboard/Plywood). The edge banding are widely used for furniture, office equipment, laboratory, kitchenware, high traffic areas which require increased edge thickness for more durability and impact resistance. Available in a wide range of colors and textures matched to all Modecor panels and laminates colors and textures. Use from either non-glued or pre-glued edge banding as per your requirement. |
|||
| Special Characteristics | |||
Melamine
PVC
|
|||
| Pre-Glued Edge Bands | |||
Pre-Glued Edge Bands
|
|||
| Non-Glued Edge Bands | |||
Pre-Glued Edge Bands
|
|||
Modecor recommends that the decorative surfaces may be cleaned with warm water and mild soaps, such as those used for hands and dishes. We do not recommend the use of cleaners, which may contain abrasives, acids or alkalis; they will damage the decorative surface. Remove stubborn stains with a 1.5-minute exposure to a hypochlorite bleach, followed by a clean water rinse.
It is recommended that any of following reagents should not come in contact with the decorative surfaces.
- Alcohol containing 1% iodine in solution
- Berry products
- Gentian violet
- Hydrogen peroxide solution
- Hypochlorite bleach, except as described above
- Lye solutions
- Mild silver protein, such as 20% argyrols
- Mineral acids, hydrochloric acid such as Lime-A-Way, sulfuric or nitric acid
- Potassium permanganate
- Silver nitrate, in 1% concentration
- Sodium bisulfate, such as Sani-Flush
If a laminate is required to withstand these chemicals, please refer to the technical data for Modecor laminates or contact us.
Storage Tips For Laminates
- Recommended storage conditions are 25°C temperature and 50% relative humidity.
- Store the sheets horizontally and full size, covered with suitable material to prevent from dust.
– MELAMINE FACED PANELS
MDF AND CHIPBOARDS
– EDGE BAND
MELAMINE AND PVC
– DECORATIVE LAMINATES
DECORATIVE LAMINATES
CONTINUOUS PRESS LAMINATES (CPL)
DECORATIVE POSTFROMING LAMINATES
– LAMINATE FLOORING
LAMINATE FLOORING
Reviews
There are no reviews yet.