
Mortar spraying machine
|
||||||
The product name
|
QJ-800-C mortar spraying machine
|
Voltage and power
|
8 HP /12 HP /18 horsepower
|
|||
Delivery pressure
|
3 mpa
|
Conveying flow
|
3 m3
|
|||
Air compressor power
|
3KW
|
Conveying height
|
15-30 m.
|
|||
Can after spraying pipe
|
60 m.
|
Through the largest particles
|
3 to 5 mm
|
|||
The weight
|
400 kg
|
size
|
1850*850*1120MM
|



Main Features
With the traditional manual white wall, plaster and market before white wall machine performance compared to using rapid mortar spraying machine has the following advantages:
1. The little French grey, save water, save material, can reduce more than 20% of the cost.
2, the operation is simple, do not need scaffolding, don’t have to mobile devices, need not repair the grounds, Yin and Yang are free to spray Angle, roof, shortening the time limit for a project, to improve the schedule, and section
About the frame material expenditures.
3, the high speed, high efficiency, low labor intensity, a sprayer (multi-function control) per hour can easily spray 150 ㎡, remove preparation time, work 8 hours a day calculations,
Can be sprayed over 1000 ㎡, is equivalent to 20 skilled hard day of work.
4, small investment, large gains, if each every day (multi-function control) coating equipment coating 1000 ㎡, according to the market average of $4 per ㎡, remove the worker’s wages of about 500 yuan, every day
Each device can be a profit of 3000 yuan, the removal of other factors, the annual income of 500000 yuan of above, are also expected.
To adapt to the spraying range:
Roof, wall, ceiling wall wire mesh reinforcement (building reinforcement), metope hair starting point, high embankment slope protection, tunnel, subway, garden rockery, bricky system template,
Steel structure layer, etc.Building exterior wall thermal insulation material inside and outside wall mortar spraying, spraying, mortar roughcast, refractory coating building large spray fire materials, waterproofing agent
Paste the project.
Features:
1. Adjust the flow, bring up the best painting effect.
2. Besides you can switch on the electric cabinet, also equipped with remote control switch spraying.
3. The spray gun and feeding tube connections can rotate and easy operation.
4. The construction of high efficiency and good quality.
5. Volume is moderate, on-site handling, and low cost of accessories, maintenance is simple.
6. Easy to use, high speed, province materials, artificial and cheaper, one machine with three people, only 150 square/hour (thickness 2 cm).
8. The material ratio (cement) 0.7:3 mortar.

Machine
Name: Mortar spraying machine
Brand: QJ-800-C
Original: CHINA
A sprayer can easily spray 150 m2 per hour, remove preparation time, work 8 hours per hour calculation, can be sprayed
More than 1000 m2, is 20 skilled hard day of work.
Reviews
There are no reviews yet.