Product Description
Webster Hardness Tester W-20 for aluminum hardness test
|
Model
|
W-20
|
|
Testing Range
|
0 ~ 20 HW (equivalent to 20 ~ 110 HRE,58-131HRV)
|
|
Resolution
|
0.5 HW (5 ~ 17 HW)
|
|
Repeatability
|
0.5 HW (5 ~17 HW)
|
|
Application
|
Aluminum Alloy
|
|
Dimension
|
31*22*10cm(L*W*H)
|
Webster Hardness Tester is an instrument that can promptly on-site test the hardness of aluminum alloy material, including section
bar,tubes,plates,aluminum parts,and hardness of other soft mental. It is such an instrument convenient in usage, with a simple
“clamp” and direct result-reading, that it always receives good feedback of high efficiency and strong stability.
Webster Hardness Tester is the best choice for mechanical testing on aluminum alloy material, it is conform to Chinese nonferrous
standard YS/T420-2004 and US standard ASTM B647-84(2000).
Application:
* W-20:General Model, suitable for common aluminum materials;
* W-20A:Suitable for aluminum materials with thickness ≤13mm;
* W-20B:Suitable for aluminum tube with inner dia.≥6mm;
* W-B75:Suitable for brass tube, brass strip;
* W-BB75:Suitable for red copper tube, red copper strip;
* W-B92:Suitable for soft stainless steel, cold-rolled strip.
Advantages:
* Indenter: Re-engineerred with advanced material and new production technology manufactured, higher hardness, long service life,
good interchangeability;
* Indicator Hand: High strength indicator hand, less likely to be bent by long-term using or mis-operation;
* Dial Glass: High strength, high toughness, uneasy to be broken or scratched;
* Handle: Forged aluminum alloy handle with fine anodized finishing, high resistance to abraision and stain;
* Hardness Blocks: Tested by standard Rockwell hardness tester, attached with test report;
* Good Stability: Stable full scale point, stable calibration point, indicator never glides;
* Easy Conversion: Results can be converted to Vickers, Rockwell and Brinell.
bar,tubes,plates,aluminum parts,and hardness of other soft mental. It is such an instrument convenient in usage, with a simple
“clamp” and direct result-reading, that it always receives good feedback of high efficiency and strong stability.
Webster Hardness Tester is the best choice for mechanical testing on aluminum alloy material, it is conform to Chinese nonferrous
standard YS/T420-2004 and US standard ASTM B647-84(2000).
Using Scope:
Especially suitable in production site,sales site or construction site for quickly testing on bulk products with non-destructive
quality inspection piece by piece.
Besides aluminum alloy material, it is also suitable to test red copper, brass, soft copper etc.
Application:
* W-20:General Model, suitable for common aluminum materials;
* W-20A:Suitable for aluminum materials with thickness ≤13mm;
* W-20B:Suitable for aluminum tube with inner dia.≥6mm;
* W-B75:Suitable for brass tube, brass strip;
* W-BB75:Suitable for red copper tube, red copper strip;
* W-B92:Suitable for soft stainless steel, cold-rolled strip.
Advantages:
* Indenter: Re-engineerred with advanced material and new production technology manufactured, higher hardness, long service life,
good interchangeability;
* Indicator Hand: High strength indicator hand, less likely to be bent by long-term using or mis-operation;
* Dial Glass: High strength, high toughness, uneasy to be broken or scratched;
* Handle: Forged aluminum alloy handle with fine anodized finishing, high resistance to abraision and stain;
* Hardness Blocks: Tested by standard Rockwell hardness tester, attached with test report;
* Good Stability: Stable full scale point, stable calibration point, indicator never glides;
* Easy Conversion: Results can be converted to Vickers, Rockwell and Brinell.
Specification:
Model:W-20
Testing Range:0 ~ 20 HW (equivalent to 20 ~ 110 HRE,58-131HRV)
Resolution:0.5 HW (5 ~ 17 HW)
Repeatability:0.5 HW (5 ~17 HW)
Application:Aluminum Alloy
Suitable Specimen Size:Thickness 0.4-6 Inner Dia. >10mm
Dimension:31*22*10cm(L*W*H)
Packing Weight:2.0KG
Size Information
W-20 Webster Hardness Tester Standard Package
|
|
L
|
W
|
H
|
||
|
Size
|
35cm
|
26cm
|
13cm
|
||
|
Weight
|
1.3kg
|
15.3
|
15.9
|
||
Related Products
After Sales Service
Two years Warranty
We can offer two years warrantys for all our products
Company Introduction
Beijing JiTai Tech Detection Device Co.,Ltd is a leading manufacturer of non-destructive instruments
such as wire rope flaw detector, belt flaw detector, digital ultrasonic flaw detector, surface roughness tester, hardness tester,ultrasonic thickness gauge, coating thickness gauge and so on. We have our own factory, which is located in Jiashan, Zhejiang Province. We have advanced state of the art technique, perfect production process, accomplished testing method and ability of developing new technology. Our R&D departments are made up by experienced NDT researcher, project manager and professional technician who come from Tsinghua University, Peking University and devoted in developing and innovating NDT products for over 10 years.
Implementing ISO-9001 Quality Management System as the foundation of Quality System, Jitai’s quality system is mature and reliable to meet current requirements and satisfy future needs to the customers all over the world. Jitai’s instruments have gained good reputation from the domestic and foreign customers. Jitai relying on technology for development, providing the high-tech instruments for domestic and foreign users continuously is also our constantly, pursuit. Relying on the professional technology,pre-sale and after-sale service, Jitai expanded rapidly in NDT industry.
We are looking for regional agents of our non-destructive testing equipments all over the world. We have comprehensive pre-sales service team which help you analysis customer’s need and select products more professionally. In order to meet the need of our customers better, we also sell variety models of non-destructive testing equipments from the manufacturers of home and abroad.
Welcome to call or mail us for the sample data.
such as wire rope flaw detector, belt flaw detector, digital ultrasonic flaw detector, surface roughness tester, hardness tester,ultrasonic thickness gauge, coating thickness gauge and so on. We have our own factory, which is located in Jiashan, Zhejiang Province. We have advanced state of the art technique, perfect production process, accomplished testing method and ability of developing new technology. Our R&D departments are made up by experienced NDT researcher, project manager and professional technician who come from Tsinghua University, Peking University and devoted in developing and innovating NDT products for over 10 years.
Implementing ISO-9001 Quality Management System as the foundation of Quality System, Jitai’s quality system is mature and reliable to meet current requirements and satisfy future needs to the customers all over the world. Jitai’s instruments have gained good reputation from the domestic and foreign customers. Jitai relying on technology for development, providing the high-tech instruments for domestic and foreign users continuously is also our constantly, pursuit. Relying on the professional technology,pre-sale and after-sale service, Jitai expanded rapidly in NDT industry.
We are looking for regional agents of our non-destructive testing equipments all over the world. We have comprehensive pre-sales service team which help you analysis customer’s need and select products more professionally. In order to meet the need of our customers better, we also sell variety models of non-destructive testing equipments from the manufacturers of home and abroad.
Welcome to call or mail us for the sample data.
Our Services & Strength
We have our own factory, can offer more OEM and ODM services
Reviews
There are no reviews yet.